Intel Pentium class 200 MHz processor or better; 128 MB RAM; 10 MB Hard Drive space; Sound Blaster-compatible sound card and speakers/headphones; SVGA or higher color video display card (minimum resolution 800x600); Internet connection for ordering, and support.

1. Check Your Hardware:
   If your microphone has never worked, or it stopped working, first check the physical connection of the microphone. Verify that it is firmly plugged into the microphone port instead of the headphone or speaker port. If you are not sure which port is correct, you can check the sound card to see if it is marked (sometimes with a picture of a microphone), you can use a process of elimination, check the documentation that came with your hardware, or contact the hardware manufacturer.
2. Run Audio Mid Recorder,Click New Button to create a new recording work,
3. Set the properties from the new recordining work window.
4. Choose the device "MIC" (Microphone) from the device combo box
5. Click "Record" button, and then speak into the microphone. If the microphone is plugged into the correct jack, the wave patterns on the display should move left and right. If it does not move, sound is not making it through your microphone.

1. Check Your Hardware:
   Connect the left and right audio-out terminals or or HeadPhone terminals on the Walkman/Discman to the line-in or microphone terminal on the sound card
2. Run Audio Mid Recorder,Click New Button to create a new recording work,
3. Set the properties from the new recordining work window.
4. Choose the device "Line In" from the device combo box then play the Walkman/Discman.
5. Click "Record" button. If the line is plugged into the correct jack, the wave patterns on the display should move left and right

1. Open Audio Mid Recorder & Windows media player at the same time.
2. Select the Stereo Mix device or the equivalent from the device combo box on the skin, adjust the recording volume for the highest possible performance.
3. Now start the playback of the windows media player and click the "Record" button in Audio Mid Recorder. Adjust the volume setting by observing a wave pattern display of the audio as it is playing.
4. When you want to stop recording, just click "Stop" button, and the destination sound file is there.

1. Open Audio Mid Recorder & Steaming audio player at the same time.
2. Select the Stereo Mix device or the equivalent from the device combo box on the skin, adjust the recording volume for the highest possible performance. You might see other devices, such as CD-Player or Microphone, in the recording panel, uncheck all non-essential devices, this cuts down background noise.
3. Now start the playback of the Real one player or the stream audio from Internet and click the "Record" button in Audio Mid Recorder. Adjust the volume setting by observing a wave pattern display of the audio as it is playing.
4. When you want to stop recording, just click "Stop" button, and the destination sound file is there.

Press "Save as" button, Select the folder you want to save your recording file in the popup "save as" dialog box;
Second, name the new file and then click the "save" button on the dialog box;
Third, after you stop recording, your recording is automatically saves as the file you have created.

When there is no file in the "Record List", or when you select check box 3 in Automatic Activation(Pause automatic and restart recording with a new file) , the program will give a file name automatically.